Cut plates - JACQUET UK

Using our extensive cutting capacities (plasma, laser, water jet and sawing), we can guarantee our clients high quality products with tight tolerances and delivered in a fast and reliable time frame delivery.

The most economical solution for all forms of stainless steel and nickel alloy pieces.

The high precision of the laser allows tight tolerances up to 50mm thickness. Also ideal for large quantities of pieces.

High-pressure water jet cutting reduces or avoids possible machining. No shape or thickness limitations, cold cutting without heat affected zone (HAZ). Ideal for complex cutting of stainless steels and nickel alloys.

Sawing ensures a good cutting perpendicularity for medium and thick pieces and flats, without a heat affected zone (HAZ).

Compare tolerances according their cutting processes

THICKNESS (mm)	SAW
	L ≤ 3 000 mm		3 001 < L ≤ 6 000 mm		L > 6 000 mm
	W ≤ 1 000 mm	W > 1 000 mm	W ≤ 1 000 mm	W > 1 000 mm	W ≤ 1 000 mm	W > 1 000 mm
1 … 150	L : 0 / + 3 mm W : 0 / + 2 mm	L : 0 / + 3 mm W : 0 / + 4 mm	L : 0 / + 5 mm W : 0 / + 2 mm	L : 0 / + 5 mm W : 0 / + 4 mm	L : 0 / + 8 mm W : 0 / + 3 mm	L : 0 / + 8 mm W : 0 / + 4 mm
Comment							–

THK (mm)	LASER
THK (mm)	L ≤ 300 mm	301 < L ≤ 1000 mm	L > 1000 mm
1	± 0.2 mm	± 0.25 mm	± 0.5 mm
5	± 0.2 mm	± 0.25 mm	± 0.6 mm
10	± 0.3 mm	± 0.3 mm	± 0.8 mm
15	± 0.3 mm	± 0.3 mm	± 0.8 mm
20	± 0.35 mm	± 0.40 mm	± 1 mm
25	± 0.5 mm	± 0.75 mm	± 2 mm
30	± 1 mm	± 2 mm	± 5 mm
35
40
50
60	Not Applicable
70
80
90
100
110
120
130
140
150
Comment	–

THK (mm)	WATER JET
	L ≤ 1000 mm			1001 < L ≤ 3000 mm	3001 < L ≤ 6000 mm	L > 6000 mm
	Basic	Normal	Fine	B, N or F	B, N or F	B, N or F
1	± 0.8 mm	± 0.6 mm	± 0.4 mm	± 2 mm	± 3 mm	± 4 mm
5	± 0.8 mm	± 0.6 mm	± 0.4 mm	± 2 mm	± 3 mm	± 4 mm
10	± 1 mm	± 0.7 mm	± 0.4 mm	± 2 mm	± 3 mm	± 4 mm
15	± 1 mm	± 0.7 mm	± 0.4 mm	± 2 mm	± 3 mm	± 4 mm
20	± 1.5 mm	± 1 mm	± 0.5 mm	± 2 mm	± 3 mm	± 4 mm
25
30
35
40
50	± 2 mm	± 1.5 mm	± 1 mm	± 2 mm	± 3 mm	± 4 mm
60
70
80
90	According to plan or specification
100
110
120
130
140
150
Comment	B : Basic, N : Nomal, F : Fine Cutting angle included in tolerance = 0.2 mm per 10 mm thickness

THK (mm)	PLASMA
THK (mm)	L ≤ 2000 mm	2001 < L ≤ 6000 mm	L > 6000 mm
1	Ext. cut 0 / + 3 mm Int. cut -3 / 0 mm	Ext. cut 0 / + 5 mm Int. cut -5 / 0 mm	Ext. cut 0 / + 8 mm Int. cut -8 / 0 mm
5
10
15
20
25
30
35
40
50
60
70	Ext. cut 0 / + 5 mm Int. cut -5 / 0 mm	Ext. cut 0 / + 8 mm Int. cut -8 / 0 mm	Ext. cut 0 / + 10 mm Int. cut -10 / 0 mm
80
90
100
110
120
130	Ext. cut 0 / + 8 mm Int. cut -8 / 0 mm	Ext. cut 0 / + 10 mm Int. cut -10 / 0 mm	Ext. cut 0 / + 12 mm Int. cut -12 / 0 mm
140
150
Comment	Indicative taper of 1 – 3 mm/ face for thickness < 60 mm Indicative taper of 3 – 6 mm/ face for thickness > 60 & < 120 mm Indicative taper of 3 – 10 mm/ face for thickness >120 mm

THK (mm)	PLASMA HD
THK (mm)	L ≤ 2000 mm	2001 < L ≤ 6000 mm	L > 6000 mm
1	Ext. cut 0 / + 1 mm Int. cut -1 / 0 mm	Ext. cut 0 / + 3 mm Int. cut -3 / 0 mm	Ext. cut 0 / + 4 mm Int. cut -4 / 0 mm
5
10
15	Ext. cut 0 / + 2 mm Int. cut -2 / 0 mm	Ext. cut 0 / + 4 mm Int. cut -4 / 0 mm	Ext. cut 0 / + 5 mm Int. cut -5 / 0 mm
20	Ext. cut 0 / + 2 mm Int. cut -2 / 0 mm	Ext. cut 0 / + 4 mm Int. cut -4 / 0 mm	Ext. cut 0 / + 5 mm Int. cut -5 / 0 mm
25	Ext. cut 0 / + 3 mm Int. cut -3 / 0 mm	Ext. cut 0 / + 4 mm Int. cut -4 / 0 mm	Ext. cut 0 / + 6 mm Int. cut -6 / 0 mm
30	Ext. cut 0 / + 3 mm Int. cut -3 / 0 mm	Ext. cut 0 / + 4 mm Int. cut -4 / 0 mm	Ext. cut 0 / + 6 mm Int. cut -6 / 0 mm
35	Not Applicable
40
50
60
70
80
90
100
110
120
130
140
150
Comment	Indicative taper of 0.5 – 1 mm/ face for thickness ≤ 20 mm Indicative taper of 0.5 – 1.5 mm/ face for thickness > 20 & ≤ 30 mm